UL Standards

1.1 These requirements cover construction, performance, and maintenance of local burglar-alarm units and systems for use in mercantile premises, mercantile safes and vaults, and bank safes and vaults. 1.2 As covered by these requirements, a local alarm system consists of protective circuits and devices,connected through control apparatus to an enclosed tamper-protected sounding device mounted on […]

1.1 These requirements cover the fire safety aspects of industrial trucks with internal-combustion engines, such as tractors, platform-lift trucks, fork-lift trucks, and other specialized vehicles for industrial use. These requirements do not cover other possible safety aspects of such equipment. 1.2 These requirements do not cover farm or road vehicles or automotive vehicles for highway

1.1 These requirements cover limited duty welding and cutting power sources, wire feeders, torches, and electrode holders that are intended for use by a layperson in a nonindustrial setting in accordance with the National Electrical Code, NFPA 70. Products covered by these requirements include only welding products rated 600 volts or less, and are commonly

1.1 These requirements cover self-contained, refrigerated vending machines intended for connection to alternating-current circuits rated 600 volts or less in accordance with ANSI/NFPA 70. Vending machines covered by these requirements: a) Incorporate refrigeration systems of the air-cooled or water-cooled type employing hermetic refrigerant motor-compressors; b) May be battery operated; c) May employ flammable refrigerant as

1.1 In the US, this standard covers the following: a) Thermoplastic and rubber tapes for use as electrical insulation at not more than 600 Vand at 80° C (176° F) and lower temperatures on joints and splices in wires and cables in accordance with NFPA 70. It is intended that rubber tape on a joint

1.1 This Standard covers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and at 80°C (1 76°F) and lower temperatures on joints and splices in wires and cables in accordance with the National Electrical Code, NFPA 70. It is intended that rubber tape on a joint or splice