ISO 5173:2009 specifies a method for making transverse root, face and side bend tests on test specimens taken from butt welds, butt welds with cladding (subdivided into welds in clad plates and clad welds) and cladding without butt welds, in order to assess ductility and/or absence of imperfections on or near the surface of the […]

ISO 5131:2015 specifies a method for the measuring and reporting of the noise at the operator(s) position of a tractor used in agriculture and forestry. The measured noise relates only to the basic machine and applies to tractors with machine-carried operators. The results provide information to the operator(s) in order to avoid exposing themselves to

ISO 5072:2013 describes methods for the determination of true relative density and the apparent relative density of brown coals and lignites.

ISO 5002:2013 specifies the characteristics of carbon steel sheet of commercial and drawing qualities in cut length or coil form, zinc coated by electrolytic deposition. Electrolytic zinc-coated sheet is intended for the manufacture of formed or of miscellaneous parts, and can be supplied chemically treated to render it more suitable for painting. The zinc coating

ISO 4995:2008 applies to hot-rolled steel sheet of structural quality in the grades and classes listed in Table 1, usually prepared without the use of microalloying elements. The product is intended for structural purposes where particular mechanical properties are required. It is generally used in the delivered condition and is intended  for bolted, riveted or

This International Standard establishes guidelines for the macroscopic examination of steel by hot etching, room temperature etching and electrolytic etching. The method has very wide application. Selection of the type, concentration and temperature of the reagent, the etching apparatus and the conditions of surface preparation of the test piece make it possible to achieve the

ISO 4918:2009 specifies methods for a) assessment of the wear behaviour of textile floor coverings, b) assessment of the change in colour (glossing) of needled floor coverings without a pile, c) assessment of the general structural integrity of textile floor coverings, d) determination of susceptibility to surface crazing, of construction integrity and of joint stability

This International Standard specifies two methods for determining the rebound resilience of rubber the hardness of which lies between 30 IRHD and 85 IRHD. They are the pendulum method and the tripsometer method. With the pendulum method, a mass with a spherical end impacts a flat test piece, firmly held but free to bulge.The kinetic

ISO 4650:2012 specifies two methods for the identification of rubbers, including thermoplastic elastomers, either in the raw state or in the form of vulcanized or unvulcanized mixes. The first method is based on infrared spectrometric examination using the transmission technique. The second method makes use of analysis by reflectance. A comparison of the spectra resulting

ISO 4665:2016 specifies methods for the exposure of vulcanized or thermoplastic rubbers to natural or artificial weathering and methods for the determination of changes in colour, appearance,and physical properties resulting from exposure.