1.1 These requirements cover heat responsive links used for fire-protection service. These links consist of devices intended for installation under load conditions such as for use with automatic fire suppression systems; or automatic closure devices for doors, windows, dampers or smoke relief vents. 1.2 Heat responsive links are categorized by temperature rating, type of coating […]

1.1 These requirements cover metal waste cans intended to be employed in factories, garages,workshops, and other locations where there is need for a receptacle for temporary storage inside buildings of oily waste, rags, and other similar combustible waste materials.

1 .1 These requirements cover positive displacement liquid meters for: a) Flammable and combustible liquids of the type and size commonly used in the assembly of motor fuel dispensing devices and b) Liquefied petroleum gas (LP-Gas) of the type and size commonly used in the assembly of motor fuel dispensing devices and tank trucks.

1.1 These requirements cover single- and multiple-jacketed lined fire hose with or without couplings attached, in the trade sizes of 1-1/2, 1-3/4, 2, 2-1/2, 3, 3-1/2, 4, 5, and 6 inch (38, 45, 51, 65, 76, 89, 102, 127, and 152 mm nominal ID). Single-jacketed hose is intended for service test pressures of 150, 200,

1 .1 These requirements cover single- and multiple-jacketed lined fire hose with or without couplings attached, in the trade sizes of 1 -1 /2, 1 -3/4, 2, 2-1 /2, 3, 3-1 /2, 4, 5, and 6 inch (38, 45, 51 , 65, 76, 89, 1 02, 1 27, and 1 52 mm nominal ID). Single-jacketed

1.1 These requirements cover 60 – 250°C (140 – 482* F) single- and multiple-conductor power-limited circuit cables for use as fixed wiring within buildings (some are also marked for direct burial) principally for Class 3 and Class 2 circuits as descrbed in Article 725 and other applicable parts of the National Electrical Code (NEC). Cables