1.1 These methods of fire tests are applicable to window assemblies, including glass block and other light transmitting assemblies, for use in the protection of openings in vertical fire resistive assemblies. 1.2 Assemblies classified in accordance with this standard provide only limited protection from the transmission of heat. This standard provides guidance to measure the […]

1.1 These requirements cover interlocked steel or aluminum armored cables that contain 2, 3, or 4, 14 –1 AWG insulated circuit conductors with or without grounding conductors and are for use as Type AC Armored Cable in accordance with Article 320 and other applicable parts of the National Electrical Code (NEC), ANSI/NFPA 70. 1.2 These

These requirements cover flexible aluminum and steel conduit designed for use as metal raceway for wires and cables in accordance with the National Electrical Code, NFPA 70.

1.1 These requirements cover tests ftor flammability of polymeric materials used for parts in devices and appliances. They are intended to serve as a preliminary indication of their acceptability with respect to flammability for a paricular application. 1.2 The methods described in this Standard involve standard size specimens and are intended to be used solely

This standard states basic construction, test, and marking requirements for fixture wires. Fixture wires are single conductor and are of the following types: 600 volt Types: PTF, PTFF, PAF, PAFF, KF-2, KFF-2, PF, PFF, PGF, PGFF, SF-2, SFF-2, ZF, ZFF, ZHF, TF, TFF, TFN, TFFN, RFH-2, FFH-2, RFHH-2, and RFHH-3 300 volt Types: KF-1 ,

These requirements cover pressure regulators for use with LP-Gas equipment.

These requirements apply to power-operated dispensing devices for petroleum products such as gasoline for use as motor fuel. Requirements for the installation and use of these dispensing devices are included in the Automotive and Marine Service Station Code, NFPA 30A, and the National Electrical Code, NFPA 70.