1.1 These requirements cover the test procedures applicable to the fire-resistance classification of record protection equipment intended to provide protection to one or more types of records when exposed to various durations of fire exposure. 1.2 Record protection equipment consists of sel-contained, moveable devices of varying configurations,such as insulated bodies with insulated doors or drawers […]

1.1 These requirements cover panelboards to be employed in acordance with the National Electrical Code, NFPA 70. . 1.2 These requirements cover panelboards for the control and protection of electric lighting and appliance branch circuits, and power circuits, including feeder distribution panelboards. They also cover units specifically designed for panelboard assembly.

This standard states basic construction, test, and marking requirements for fixture wires. Fixture wires are single conductor and are of the following types: 600 volt Types: PTF, PTFF, PAF, PAFF, KF-2, KFF-2, PF, PFF, PGF, PGFF, SF-2, SFF-2, ZF, ZFF,ZHF, TF, TFF, TFN, TFFN, RFH-2, FFH-2, RFHH-2, and RFHH-3 300 volt Types: KF-1, KFF-1, SF-1,

This standard specifies the requirements for flexible cords, elevator cables, and hoistway cables rated 600 V maximum and electric vehicle cables rated 1000 V maximum and intended for use in accordance with CAN/CSA C22.1，Canadian Electrical Code, Part 1, in Canada, NOM-001-SEDE，La Norma de Instalaciones Electricas, in Mexico, and NFPA 70, National Electrical Code (NEC), in

These requirements cover power-operated pumps and bypass valves for use in liquid transfer operations in non-refrigerated systems in installations for: a) Anhydrous ammonia systems installed in accordance with the Safety Requirements for the Storage and Handling of Anhydrous Ammonia, CGA/GAS G-2.1 (ANSI K61 .1 ); b) Liquefied petroleum gas (LP-Gas) systems installed in accordance with

These requirements cover power-operated pumps and bypass valves for use in liquid transfer operations in non-refrigerated systems in installations for: a) Anhydrous ammonia systems installed in accordance with the Safety Requirements for the Storage and Handling of Anhydrous Ammonia, CGA/GAS G-2.1 (ANSI K61.1); b) Liquefied petroleum gas (LP-Gas) systems installed in accordance with the Liquefied

This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1 , the provisions of the National Electrical Code, NFPA 70, and the provisions of Mexico’s Electrical Installations,NOM-001 -SEDE, as follows: a) Enclosures for indoor locations, Types 1

1.1 These requirements cover all electric signs, art forms and outline lighting for use in accordance with the National Electrical Code, NFPA 70. 1.2 Electric signs include all signs (regardless of voltage) that are electrically operated and/or electrically illuminated, including but not limited to the following methods of illumination: incandescent, fluorescent, high intensity discharge (HID),

1.1 These requirements cover manual signaling boxes for fire alarm systems intended for permanent installation and used in ordinary locations in accordance with the National Electrical Code, NFPA 70, and the National Fire Alarm Code, NFPA 72. 1.2 A manual signaling box is an assembly of a mechanism having electrical contacts designed to transmit a