1.1 This specification covers nickel-chromium-iron-molybdenum-tungsten alloy UNS N06920 in the form ofrolled plate, sheet, and strip for general corrosion service. 1.2 The following products are covered under this specifi-cation: 1.2.1 Sheet and Strip—Hot or cold rolled, annealed and descaled unless solution-annealing is performed in an atmo-sphere yielding a bright finish; and 1.2.2 Plate—Hot rolled, solution-annealed, […]

1.1 This test method monitors the reactivity of a gaseous test environment in which metal surfaces (for example, elec-trical contacts, assembled printed wiring boards, and so forth) and other materials subject to pollutant gas attack undergo accelerated atmospheric corrosion testing. This test method is applicable to the growth of adherent corrosion films whose total corrosion

1.1 This test method covers equipment and methods for determining the porosity of gold and palladium coatings,particularly electrodeposits and clad metals used on elctrical contacts. 1.2 This test method is designed to show whether the porosity level is less or greater than some value which by experience is considered by the user to be acceptable

1.1 This test method covers the effects of repeated insertion and withdrawal of separable electrical connectors which are harmful to the electrical performance of the connector. 1.2 This test method is limited to electrical connectors designed for use in applications where the current through any one connection in the connector does not exceed 5 A,

1.1 This specification covers commercial zinc alloys in ingot form for remelting for the manufacture of dies and molds from the alloys as shown in Table 1.

1.1 This specification covers bare combination unilay-stranded conductors made from round copper wires, either uncoated or coated with tin or lead alloy for insulated conduc-tors for electrical purposes. These conductors shall be con-structed with a central core wire surrounded by two layers of helically laid wires, resulting in an outer diameter equal to the compressed-stranded

1.1 This specification covers two grades of wrought haf-nium and hafnium alloy strip, sheet, and plate as follows: 1.1.1 Grade R1 for nuclear applications, and 1.1.2 Grade R3 for commercial applications.

1.1 This specification covers the requirements for electrode-posited cadmium coatings on products of iron, steel, and other metals. N OTE 1—Cadmium is deposited as a coating principally on iron and steel products. It can also be electrodeposited on aluminum, brass,beryllium copper, copper, nickel, and powder metallurgy parts.

1.1 This specification contains various requirements that,with the exception of Sections 6 and 7, are mandatory requirements to the following ASTM nickel and nickel alloy, longitudinally welded tubular product specifications: Title of Specification ASTM

1.1 This specification covers lead sheet, strip, and plate of various alloys intended for use in chemical plants, sound attenuation, roofing, vibration dampening, flashing and weather stripping, waterproofing, and radiation shielding. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units