UL Standards

1.1 These requirements cover wearable buoyant devices having: a) At least one compartment that relies upon inflation by gas or other medium to provide buoyancy, and b) A quantity of inherently buoyant material.

1.1 These requirements cover cord-connected electrically operated lawn mowers rated 250 volts or less to be employed in accordance with ANSI/NFPA 70. 1.2 These requirements also cover battery-powered lawn mowers as specified in Battery-Powered Lawn Mowers, Supplement SA in this Standard.

1.1 These requirements cover test procedures to be used in the evaluation of Class 120(E) or higher electrical insulation systems (EIS) for use in the United States, and Class 130(B) or higher EIS for use in Canada, where the thermal factor is the dominating aging factor. These requirements also cover the investigation of the substitution

1 .1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated,silicone-polymer-coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for materials and ratings) and intended for use in equipment designed to be installed and used in accordance with the rules of the Canadian Electrical

1.1 These requirements cover household electric products having personal hygienics or health care applications, such as hydromassage units, contact lens disinfectors and cleaners, and toothbrushes, rated at 250 V or less, for use on premises wiring systems in accordance with the National Electrical Code. 1.2 These requirements do not cover professional medical and dental equipment,

1.1 This outline covers corrugated medical tubing systems intended for use in hospitals and health centers for distribution of nonflammable medical gas in accordance with the Standard for Health Care Facilties, NFPA 99. 1.2 CMT systems are intended for inside aboveground and in slab, when installed in approved nonmetallic conduit, applications only.

1.1 These requirements cover metal receptacles intended primarily for temporary, indoor storage of waste paper and other similar materials. These containers are intended to be emptied regularly and their contents disposed of. 1 .2 These requirements cover waste paper containers intended for use as complete assemblies,consisting of a container body and a head or cover.

1.1 This Standard specifies the requirements for distribution (power) cables, and control and signal cables for installation aboard marine vessels, fixed and floating offshore petroleum facilities, and mobile offshore drilling units (MODUs), in accordance with industry installation standards and the regulations of the authorities having jurisdiction. The cables are single or multi-conductor, with or without

1.1 These requirements cover movable and wall- or ceiling-hung electric room-heating equipment rated 600 volts or less to be employed in ordinary locations in accordance with the National Electrical Code,ANSI/NFPA 70. 1.2 These requirements do not cover fixed heaters, location-dedicated heaters, baseboard heaters, duct heaters, central-heating furnaces, fan-coil units, panel- or cable-type radiant-heating equipment, electric

1.1 These requirements cover diesel engines for driving centrifugal fire pumps. 1.2 The engines covered by these requirements are intended for installation and use in accordance with the Standard for the Installation of Stationary Fire Pumps for Fire Protection, NFPA 20.