UL Standards

1.1 This test method describes the testing procedures and requirements applicable to the classification of interior finish material assemblies by use of a standardized room fire exposure. 1.2 This test method is intended for use in the evaluation of the flammability contribution of wall material assemblles, elling material assemblies, or both, exposed to early fire […]

1 .1 This standard describes a test method for measuring the resistance of protective materials to rapid-temperature-rise fires. 1.2 The test method covers a full-scale fire exposure, intended to evaluate the thermal resistance of protective material applied to structural members and the ability of the protective material to withstand the fire exposure.

1.1 The requirements of this Standard cover arc-fault circuit-interrupters (AFCIs) of the branch/feeder,outlet circuit, portable, and cord type intended for use in dwelling units. These devices are intended to mitigate the effects of arcing faults that may pose a risk of fire ignition under certain conditions if the arcing persists. 1.2 AFCIs have a maximum

1.1 These requirements apply to household, commercial, and institutional-use carts, stands and entertainment centers intended to provide a surface for the support or attachment of audio and/or video equipment. 1.2 These requirements also apply to tall institutional-use carts and stands intended to provide a surface for the support of audio and/or video equipment that have

1.1 These requirements cover discharge-path resistors that are intended to be connected between the antenna and the supply circuit of a radio-, video-, or television-type appliance. The resistors are intended to reduce the risk of fire or electric shock due to the buildup of a static electrical charge on the antenna connected to the appliance.

1 .1 These requirements cover single and multiple optical-fiber cables for control, signaling, and communications as described in Article 770 and other applicable parts of the National Electrical Code (NEC). Cables complying with these requirements are: Type OFNP – Plenum – A nonconductive cable for use in ducts, plenums, and other spaces used for environmental

1 .1 These requirements cover motor-operated massage and exercise machines, such as vibrators,exercise bicycles, vibrating and massaging chairs, and the like, are to be employed in accordance with the National Electrical Code, NFPA 70. 1.2 These requirements also cover massage and exercise machines such as vibrators in which motion of an operating part is produced

1.1 This standard contains specific details of the conductors, of the insulation, of the jackets and other coverings, and of the methods of sample preparation, of specimen selection and conditioning, and of measurement and calculation that are required in wire and cable standards. 1.2 The requirements for the particular materials, construction, performance, and marking of

1 .1 These requirements apply to self-contained spas. They also apply to field-installed equipment assemblies, blowers, and controls for use with field-installed hot tubs, swimming pools, and non-self-contained spas. These products are for household or commercial use, indoors, outdoors, or both.All equipment is intended for installation and use in accordance with Article 680 of the