This part of ISO 5 specifies the geometric conditions for the definition of ISO 5 standard reflection density. It also recommends tolerances on geometric conditions that can be used in the design of instruments. The spectral conditions are specified in ISO 5-3. This part of ISO 5 also specifies the requirements for polarization (if that

This part of ISO 5 specifies spectral conditions and computational procedures for the definition of several types of ISO 5 standard densities used in imaging applications in photography and graphic technology.

This part of ISO 5 establishes terms, symbols, functional notations and a coordinate system to describe geometric and spectral conditions for the measurement of the degree to which a specimen modulates radiant flux for applications in photography, graphic technology, and radiometry. This part of ISO 5 primarily provides a system for describing methods of measuring

This part of ISO 148 specifies the requirements, preparation and methods for qualifying test pieces used for the indirect verification of pendulum impact testing machines in accordance with ISO 148-2. It specifies notched test pieces with nominal dimensions identical to those specified in ISO 148-1;however, the tolerances are more stringent. NOTE 1 The chemical composition

This document specifies a mould (designated the type F ISO mould) for the injection moulding of plates with a preferred size of 80 mm × 120 mm and a minimum size of 80 mm × ≥90 mm and with a preferred thickness of 2 mm for single-point and multi-point data acquisition. It has been found

This part of ISO 230 specifies test procedures to evaluate the measuring performance of contacting probing systems (used in a discrete-point probing mode) integrated with a numerically controlled machine tool. It does not include other types of probing systems, such as those used in scanning mode or non-contacting probing systems. The evaluation of the performance