This document gives the rules for geometrical specifications of integral and derived features, using the line profile and surface profile characteristic symbols as defined in ISO 1101.

ISO 1658:2015 specifies — physical and chemical tests on raw natural rubbers; — standard materials, standard test formulae, equipment and processing methods for evaluating the vulcanization characteristics of natural rubber (NR).

ISO 1629:2013 establishes a system of symbols for the basic rubbers in both dry and latex forms, based on the chemical composition of the polymer chain. The purpose of this International Standard is to standardize the abbreviated terms used in industry,commerce, and government, and it is not intended to conflict with, but rather to act

ISO 1524:2013 specifies a method for determining the fineness of grind of paints, inks and related products by use of a suitable gauge, graduated in micrometres. It is applicable to all types of liquid paints and related products, except products containing pigments in flake form (e.g. glass flakes, micaceous iron oxides, zinc flakes).

ISO 1503:2008 sets out design principles, procedures, requirements and recommendations for the spatial orientation and direction of movement of controls and displays used in tool machines, industrial robots,office machines, earth-moving machinery, transportation (automobiles, railway electric cars/rolling stock, aircraft, ships, etc.), information, daily commodities, public utilities and the operational components of building facilities.

This International Standard specifies the conditions for performing torsional, constant-amplitude, nominally elastic stress fatigue tests on metallic specimens without deliberately introducing stress concentrations. The tests are typically carried out at ambient temperature in air (ideally at between 10 °C and 35 °C) by applying a pure couple to the specimen about its longitudinal axis. While

ISO 1346:2012 specifes requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes,8-strand braided ropes and 12-strand braided ropes for general service made of polypropylene, and gives rules for their designation.

ISO 1207:2011 specifies the characteristics of slotted cheese head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898-1, ISO 965-2,ISO