ISO 4647:2010 specifies a method for the determination of the static adhesion of textile cord to vulcanized rubber using the H-pull test. It is applicable to cords made from natural or man-made fibres. The property levels obtained with this method are affected considerably by the history of the cord and the rubber compound. The method […]

ISO 4641:2010 specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies. Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e.their ambient and water temperature ranges: ⎯ ambient temperatures: −25 °C to +70 °C; ⎯ water temperatures during operation: 0 °C to +70

ISO 4633:2015 specifies requirements for materials used in vulcanized rubber seals for the following: a) cold drinking-water supplies (up to 50 °C); b) drainage, sewerage, and rainwater systems (continuous flow up to 45 °C and intermittent flow up to 95 °C).

ISO 4611:2008 specifies the conditions of exposure of plastics to ⎯ damp heat; ⎯ water spray; ⎯ salt mist; and the methods for the evaluation of the change in some significant characteristics after given exposure stages.

ISO 4414:2010 specifies general rules and safety requirements for pneumatic fluid power systems and components used on machinery as defined by ISO 12100:2010, 3.1. It deals with all significant hazards associated with pneumatic fluid power systems and specifies principles to apply in order to avoid those hazards when the systems are put to their intended

ISO 4373:2008 specifies the functional requirements of instrumentation for measuring the level of water surface (stage), primarily for the purpose of determining flow rates. This International Standard is supplemented by an annex providing guidance on the types of water level measurement devices currently available and the measurement uncertainty associated with them (see Annex A).

ISO 4305:2014 specifies the conditions to be taken into consideration when verifying the stability of a mobile crane by calculation, assuming that the crane is operating on a firm and level surface (up to 1 % gradient). It applies to mobile cranes as defined in ISO 4306-2, i.e. appliances mounted on wheels (tires) or crawlers,with