ISO 18335:2024 details a process for measuring the dynamic viscosity, η, and density, ρ, which are essential for calculating the kinematic viscosity, ν, of middle distillate fuels, fatty acid methyl ester (FAME) fuels, and their mixtures, up to a 60% blend with middle distillate fuels, as well as lubricating oils (such as base oils and […]

ISO 16297:2020 establishes a protocol for assessing instrumental alternative methods for determining the total bacterial count in raw milk from various animal species. Note: This document serves as a complement to ISO 16140-2 and ISO 8196 | IDF 128 (all parts).

ISO 16192:2024 outlines the principles and guidelines applicable to all space project activities (management, technical, quality, cost, and schedule). The application of this document is intended to be included in the supplier’s quality management system, but can be tailored in individual contracts as agreed by the customer and supplier, depending on: —the content of each

ISO 16032:2024 outlines an engineering method for measuring sound pressure levels in rooms, specifically those equipped with service equipment installed in buildings. The document covers specific measurements of sounds from sanitary installations, mechanical ventilation, heating and cooling service equipment, elevators, rubbish chutes, heating devices, blowers, pumps, and other auxiliary service equipment, as well as motor-driven

ISO 16021:2024 offers guidelines and requirements for the design and execution of evaluations for single-use adult incontinence absorbing products. It outlines the creation of data collection tools and establishes a framework for gathering and documenting feedback from users and their caregivers regarding the acceptability of the products. Additionally, it describes a product diary that can

ISO 15610:2024 outlines the procedure for qualifying a welding process by utilizing data from tested welding consumables. It builds upon the requirements established in ISO 15607 and specifies the range of qualification. This document applies to the welding processes listed in Table 1 and is limited to parent material groups 1.1, 8.1, 21, 22.1, and

ISO 15494:2015 specifies the characteristics and requirements for components such as pipes, fittings, and valves made from one of the following materials intended to be used for thermoplastics piping systems in industrial applications above and below ground: Polybutene (PB); Polyethylene (PE); Polyethylene with raised temperature resistance (PE-RT); Crosslinked polyethylene (PE-X); Polypropylene (PP). Note 1: Industrial

ISO 15370:2021 outlines the requirements for the approval, installation, and maintenance of low-location lighting systems, as defined in Chapter II-2, Regulation 13.3.2.5.1 of the International Convention for the Safety of Life at Sea, 1974 (SOLAS 74), as amended in 2000, and further detailed in Chapter 11 of the International Code for Fire Safety Systems (FSS

ISO 14373:2024 establishes the requirements for resistance spot welding in the production of assemblies made from uncoated and metallic-coated, or weldable non-metallic-coated low-carbon steel. This includes configurations of two or three metal sheets, with a maximum single-sheet thickness ranging from 0.4 mm to 3.0 mm. The document applies to the welding of sheets that may

ISO 12821:2019 outlines the dimensions for the 26 mm tall crown finish used on glass bottles for beverages. This tall crown finish is intended for compatibility with a metal crown cap (refer to EN 17177 for details).