1.1 These requirements cover cord reels for general use, as well as cord reels – herein referred to as special-use cord reels – intended to be mounted on or in electrical utilization equipment such as appliances, portable lamps, or similar equipment. These cord reels are intended for use in accordance with the National Electrical Code, […]
UL 355:2020 pdf download Read More »
This standard is applicable to ac contactors applied at voltages in the range of 1 501V to 15kV, and metal-enclosed contactor-based controllers, control centers, and other control assemblies and associated equipment applied at voltages in the range of 751V to 15kV, designed for operation at frequencies of 50 or 60 Hz on three-phase systems. These
UL 347:2020 pdf download Read More »
1.1 These requirements cover hose and hose assemblies, including vapor recovery hose and assemblies, for use on dispensing devices for motor fuels. A flammable liquid hose assembly consists of fexible hose and fttings suitable for attachment to motor fuel dispensing equipment. Motor fuels, as defined by these requirements, include one or more of the fuels
UL 330A:2019 pdf download Read More »
1.1 These requirements cover the performance during fire tests of pre engineered fire extinguishing system units intended for the protection of commercial cooking equipment for restaurants, cafeterias and other similar venues. For installation requirements, see the following documents: NFPA 17, Standard for Dry Chemical Extinguishing Systems; NFPA 96, Standard for Ventilation Control and Fire Protection
UL 300:2019 pdf download Read More »
1.1 These requirements cover accessories intended for direct connection to the low or delivery pressure side of compressed gas regulators. These devices are not intended for direct connection to high or storage cylinder pressures. 1.2 Accessories covered by these requirements are intended for use with compressed gases such as air, carbon dioxide, inert gases, fuel
UL 252A:2019 pdf download Read More »
1 .1 These requirements cover fixed and portable luminaires for installation and use in hazardous (classified) locations, Class I, Divisions 1 and 2, Groups A, B, C, and D; Class II, Division 1 , Groups E, F, and G; Class II, Division 2, Groups F and G; and Class III, Divisions 1 and 2, in
UL 844:2012 pdf download Read More »
1.1 This Standard applies to equipment wiring terminals for use with all alloys of copper, aluminum, or copper-clad aluminum conductors, in accordance with the National Electrical Code, ANSI/NFPA 70, as follows: a) equipment wiring terminals intended to hold one or more conductor(s); b) equipment wiring terminals intended for use in appliances and equipment that comply
UL 486E:2019 pdf download Read More »
1.1 This Standard applies to single-polarity connectors for use with all alloys of copper or aluminum, or copper-clad aluminum conductors, or all three, for providing contacts between current-carrying parts, in accordance with the Canadian Electrical Code, Part I, C22.1, in Canada, the National Electrical Code,NFPA-70, in the United States of America, or the Standard for
UL 486A-486B:2018 pdf download Read More »
1.1 This Standard applies to Class A, single- and three phase, ground-fault circuit interrupters intended for protection of personnel, for use only in grounded neutral systems in accordance with the National Electrical Code (NEC), ANSINFPA 70, the Canadian Electrical Code, C22.1 (CEC)， and Electrical Installations (Use), NOM-001-SEDE. These devices are intended for use on alternating
UL 943:2012 pdf download Read More »
1.1 These requirements cover an alternate approach to specitying through air and over surtace spacings for electrical equipment through the use of the principles of insulation coordination. 1.2 The complete principles of insulation coordination involve the consideration of the combination of clearances, creepage distances, and the properties of solid insulation used to constitute the insulation
UL 840:2012 pdf download Read More »