1.1 In the US, this standard covers the following: a) Thermoplastic and rubber tapes for use as electrical insulation at not more than 600 Vand at 80° C (176° F) and lower temperatures on joints and splices in wires and cables in accordance with NFPA 70. It is intended that rubber tape on a joint

1.1 This Standard covers thermoplastic and rubber tapes for use as electrical insulation at not more than 600 V and at 80°C (1 76°F) and lower temperatures on joints and splices in wires and cables in accordance with the National Electrical Code, NFPA 70. It is intended that rubber tape on a joint or splice

1.1 These requirements cover attachment plugs, receptacles, cord connectors, inlets, current taps provided with wiring terminals for flexible cord, and flatiron and appliance plugs – all intended for connection to a branch circuit for use in accordance with the National Electrical Code, ANSI/NFPA 70. 1.2 These requirements do not cover devices rated at more than

1.1 This Standard covers sun lamps, heat lamps and combination sun and heat lamps rated at not more than 125 V. A sun lamp is intended for production of ultraviolet radiation for skin tanning. A heat lamp is intended for production of infrared radiation. A combination sun and heat lamp is intended for production of

1.1 These requirements cover electrically operated general purpose and safety valves rated 600 volts or less and intended for the control of fluids, such as air, gases, oils, refrigerants, steam, water, and the like.Electrically operated valves, other than automotive fuel valves, covered by these requirements are intended to be used in other than hazardous locations

1.1 These requirements cover play pipes for testing of water supplies for fire protection service. 1.2 The play-pipe design and construction covered herein and illustrated in Figure 10.1 has been commonly identified as the Underwriter or National Standard type.