1.1 These requirements cover battery-powered flashlights and lanterns powered by secondary (rechargeable) batteries and general purpose primary (non-rechargeable) batteries intended for non-hazardous locations in accordance with ANSI/NFPA 70. 1.2 Flashlights and lantems are collectively categorized as products within the context of this standard.

1 .1 These requirements apply to non-networked embedded software residing in programmable components performing safety-related functions whose failure is capable of resulting in a risk of fire,electric shock, or injury to persons. 1.2 This is a reference standard in which the requirements are to be applied when specifically referenced by other standards or product safety

1.1 These requirements cover portable electric household skillets and other frying-type appliances, rated at 125 V or less, for use in ordinary locations in accordance with the National Electrical Code, NFPA 70. 1.2 Frying-type appliances in this standard include frying pans, sauce pans, griddles, corn poppers, deep fryers, oil fondues, low temperature fondues, tempuras, woks,

1.1 This Standard covers conductive electric vehicle (EV) supply equipment with a primary source voltage of 600 V ac or less, with a frequency of 50 or 60 Hz, and intended to provide ac power to an electric vehicle with an on-board charging unit. This Standard covers electric vehicle supply equipment intended for use where

1.1 These requirements cover electrical energy storage assemblies such as battery packs and combination battery pack-electrochemical capacitor assemblies and the subassembly/modules that make up these assemblies for use in electric-powered vehicles as defined in this standard. 1.2 This standard evaluates the electrical energy storage assembly’s ability to safely withstand simulated abuse conditions and prevents any

1.1 This standard covers the sorting and grading process of battery packs, modules and cells and electrochemical capacitors that were originally configured and used for other purposes, such as electric vehicle propulsion, and that are intended for a repurposed use application, such as for use in energy storage systems and other applications for battery packs,

1.1 These requirements cover enclosed and open-type Surge Protective Devices (SPDs) designed for repeated limiting of transient voltage surges as specitied in the standard on 50 or 60 Hz power circuits not exceeding 1000 V and for PV applications up to 1500 V dc and designated as fllows: Type 1 – Permanently connected SPDs intended

1.1 These requirements cover electrical cables for boats. The cables are intended for use in marine pleasure craft and consist of a single insulated conductor without a jacket or of two or more insulated conductors with or without an overall nonmetllic jacket. Each boat cable is rated as follows: 600 V; 60°C (140*F), 75°C (167″F),

1.1 These requirements cover indoor fixed electric heating systems for use on system voltages not exceeding 600 V. 1.2 The heating systems covered by this Standard are intended for installation in accordance with the National Electrical Code, NFPA 70, Article 424.

1 .1 These requirements cover submersible and nonsubmersible motor-operated pumps intended to be used in ordinary locations in accordance with the National Electrical Code, NFPA 70. 1 .2 These requirements do not cover pumps rated more than 600 volts, pumps using universal motors rated more than 250 volts, pumps for fire protection service, pumps for