1 .1 These requirements cover Type ITC instrumentation control cables consisting of two or more current-carrying copper or thermocouple alloy conductors with or without either or both: a) Grounding conductor(s), bare or insulated, and b) One or more optical-fiber members, all under an overall jacket. These electrical and composite electrical/optical-fiber cables are intended for use […]

1.1 These requirements cover hardware for the support of conduit, tubing, and cable, such as HANGERS,STAPLES, STRAPS, and similar devices for Installation in accordance with the National Elecrical Code, NFPA 70, and the Canadian Electrical Code (CEC), Part 1. 1.2 These requirements also cover STANDOFFS for nonmallic-sheathed cable, PROTECTOR PLATES, and PROTECTOR BUSHINGS.

1.1 These requirements cover devices intended for inter-connection of equipment, sensors, and actuators in remote-control, signaling, and power-limited circuits. Included are cable assemblies and fittings, feeder-tap cable systems, feed-through connectors, multi-outlet fittings, panel-mount fittings, and splitters. i These devices are rated not more than 60 A and not more than 600 V. 1.1.1 These devices

1.1 These requirements cover stationary engine generator assemblies that are intended for installation and use in ordinary locations in accordance with the following: a) The National Electrical Code, NFPA 70; b) The Canadian Electrical Code, Part I, CSA C22.1; c) The Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines,NFPA 37;

1 .1 This standard contains test procedures and methods to evaluate refrigerants and mark their containers according to the extent of the refrigerant’s flammability with regard to their intended use as components of air-conditioning and refrigeration equipment. 1.2 Deleted

1.1 This Standard contains requirements for water mist nozzles for use with water mist fire-protection systems intended for the protection of residential, light and ordinary hazard areas as well as shipboard machinery, control spaces, service areas, and public spaces. The intended application and use of a water mist nozzle is referenced in the Manufacturer’s Design

1 .1 This standard applies to transformers and power supplies, including those intended to be connected to a Class 2 source of supply, that provide the voltage and ballasting for neon and cold-cathode tubing (electric-discharge tubing) consisting of electrodes and gas such as neon, mercury, helium, argon, and similar gases, enclosed in glass. Neon transformers

1.1 These requirements cover the construction and performance, exclusive of performance during fire tests, of portable halocarbon clean agent fire extinguishers. Halocarbon clean agent fire extinguishers are intended to be utilized in accordance with the Standard for Portable Fire Extinguishers, NFPA 10 and with the National Fire Code of Canada. 1.2 The requirements for performance

1.1 These requirements cover processed solid-fuel firelogs that are intended for use as an alternative fuel in factory-built fireplaces and masonry fireplaces. 1.2 These requirements also cover processed solid-fuel fire starters, with a volatile fuel content not exceeding 75 % of the total fuel content, intended for use in factory-built fireplaces, solid-fuel burning appliances, fireplace