1.1 These requirements cover rack mounting systems, mounting grounding/bonding components, and clamping/retention devices for specific (manufacturer/model designation) flat-plate photovoltaic modules and panels that comply with the Standard for Flat-Plate Photovoltaic Modules and Panels, UL 1703, or the Standard for Photovoltaic (PV) Module Safety Qualification – Part 1: Requirements For Construction, UL 61730-1 and the Standard

1.1 These requirements cover: a) Discrete electrical products for rescue assistance two-way emergency communication systems,e.g. remote communications stations, master control units and accessories. b) Electrically- and electronically-operated amplifiers that provide speech communication and distinctive sounds in conjunction with rescue assistance twoway emergency communication systems; and c) Commercial stationary and fixed power supplies for rescue assistance

1.1 This Standard specifies the requirements for low-halogen aboveground (Type AG) reinforced thermosetting resin conduit (RTRC) and fttings for installation and use in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I, NFPA 70, National Electrical Code (NEC) and NOM-001-SEDE,Standard for Electrical Installations (Mexico), in non-hazardous locations. 1.2 The products specified in this Standard

1 .1 This standard covers flexible sprinkler hose with fittings intended for direct connection to fire sprinklers in installations requiring a flexible attachment to the sprinkler system piping such as clean rooms, suspended ceilings, and exhaust ducts. 1 .2 The products covered by this standard are intended for use in sprinkler systems installed in accordance

1.1 This standard covers portable flexible lighting products with a maximum input voltage rating of 120 volts to be used in accordance with the National Electrical Code, ANSI/NFPA 70. These products are provided with a power supply cord and are intended for outline and decorative lighting use. 1.2 These requirements cover lighting products incorporating non-replaceable

1.1 These requirements cover the test methods for measuring the fire performance of sheet plastics used in semi-conductor wet bench tool construction. 1.2 Plastic materials that are classified as Class 1 or Class 2 demonstrate limited fire propagation without the use of sprinklers.

1.1 These requirements cover manually, electrically and pneumatically powered lifts. They are intended for the lifting and transport of materials and not for the movement or support of people. They are rated 250 volts or less, to be employed in nonhazardous environmental locations in accordance with the National Electrical Code, NFPA 70. 1.2 This standard

1.1 This procedure utlines a framework for measuring and vlldating products (including intermediate products) that are resistant to bacterial growth. 12 Products that qualfty for “resistance to bacterial growth” claim must demonstrate that the ant bacterial activity obiained according to the test method of this procedure is 2.0 or greater.