1.1 This specification prescribes requirements for the lassification of carbon steel electrodes (both solid and composite) and flux-elctrode combinations for submerged arc welding. Two-run flux -electrode classification is not addressed in this specification, but is addressed in AWS A5.23/A5.23M. 1.2 This specification makes use of both U.S. Customary Units and the International System of Units […]

This standard specifies requirements for the classification of solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium-alloys. The classification of the solid wires and cut lengths and spools of wire is based on their chemical composition. For titanium welding consumables, the compositions of the wire electrodes for the gas metal

1.1 This specification prescribes requirements for the classification of surfacing electrodes for shielded metal arc welding.Solid bare electrodes and rods for surfacing are classified in AWS A5.21:2001, Specification for Bare Electrodes and Rods for Surfacing (see Clause A8 in Annex A). 1.2 Safety and health issues and concerns are beyond the scope of this standard

1.1 This specification prescribes requirements for the classification of nickel and nickel-alloy covered electrodes for shielded metal arc welding. It includes those compositions in which the nickel content generally exceeds that of any other element. 1 1.2 This specification makes use of both U.S. Customary Units and the International System of Units (SI). The measure-ments

1.1 This standard specifies the preparation and assessment of fillet weld test pieces for conformity assessment of posi-tional usability and root penetration requirements of arc welding consumables classification standards for welding non-alloy and fine grain steels, low alloy steels, stainless steels, and nickel base alloys. This standard does not specify acceptance requirements.

This standard prescribes a standard weld test assem-bly, a standard method of test specimen preparation, and two standard methods of analysis for determination of diffusible hydrogen from martensitic, bainitic, and frric steel weld metals. The methods of preparation are suit-able for shielded metal arc, gas metal arc, lux cored arc,and submerged arc welding processes. Extension

The purpose of this document is to establish standard terms and definitins to aid in the communication of infomation related to welding, adhesive bonding, brazing. soldering, themal cutting. and themal spaying. The standard terms and defnitions published in this document should be used in the oral and wilten language associated with these related processes. Whenever

1.1 Scope. This standard presents a system for indicating welding, brazing, and nondestructive examination require-ments. The system includes provisions for the graphical representation of welds, brazes, and nondestructive examination methods with conventions for specifying, at a minimum, the location and extent of their application. Optional elements and supplementary symbols provide a means for specifying additional