1.1 This practice for analyzing the environmental impact of food service equipment is intended to document the perfor-mance of food service equipment using attributes that are indicators of the appliance’s environmental impact. It includes,but is not limited to, cooking, warewashing, refrigeration, ventilation, and mechanical equipment that use energy or water in a typical commercial cooking […]

1.1 These test methods enable the user to determine if a rescue litter meets the requirement for strength depending upon particular applications and methods of use. 1.2 The test methods described in this standard are designed to test several parameters under “manner of use” conditions.

1.1 These test methods specify procedures and equipment used for testing and evaluating elliptical trainers for compli-ance to Specification F2810. Both design and operational parameters will be evaluated. Where possible and applicable,accepted test methods from other recognized bodies will be used and referenced. In case of a conflict between this document and Specification F2810, Specification

1.1 This guide establishes the minimum knowledge, skills,and abilities (KSA) required for an MSAR responder and their equine during the deployment involving lost or missing per-sons and related non-technical rescue skills used to stabilize or minimize a missing person (subject) from remaining in peril. 1.2 MSAR users ofthe guide shall meet or hold the certified

1.1 This test method describes the collection of absorption spectra of polyetheretherketone (PEEK) polymer in filled and unfilled grades, as supplied by a vendor, and the subsequent calculation of the percent crystallinity. The material is evalu-ated by infrared spectroscopy. The intensity (height) of the absorbance peaks is related to the amount ofcrystalline regions present in

1.1 This guide covers techniques that are appropriate for the construction of high performance sand-based rootzones for golf greens and tees. This guide provides guidance for the selection of materials, including soil, sand, gravel, peat, etc.,for use in designing and constructing sand-based golf turf rootzones. 1.2 Decisions in selecting construction and maintenance techniques are influenced

1.1 This guide sets forth labeling and instruction guidelines for manufacturers of headgear for non-motorized sports and recreation. 1.2 This guide applies only to protective headgear whose standard specifications are under auspices of ASTM Commit-tee F08.

1.1 This practice covers a laboratory-based in viro method for evaluating the mechanical performance of materials and devices being considered for replacement of the tibio-femoral joint in human knee joint replacement prostheses in mobile bearing knee systems. 1.2 Mobile bearing knee systems permit internal external rotation to take place on one or both articulating surfaces.Some

1.1 This specification covers ultra-high molecular weight polyethylene (UHMWPE) powder blended with alpha-tocopherol (Vitamin E) intended for use in surgical implants. 1.2 The requirements of this specification apply to alpha-tocopherol-containing UHMWPE in two forms. One is virgin polymer powder blended with alpha-tocopherol prior to con-solidation (Section 4). The second is any form fabricated from this

1.1 This practice provides guidance for the functional,kinematic, and wear testing of motion-preserving total facet prostheses for the lumbar spine. These implants are intended to allow motion and lend support to the functional spinal unit(s) through replacement of the natural facets.