1.1 This test method covers the measurement of color, trash content, micronaire, upper half mean length (length), unifor-mity index and breaking tenacity (strength) of raw cotton for cotton marketing using a cotton classification instrument. 1.2 This test method is applicable to Upland and Extra Long Staple (ELS) raw cotton.

1.1 This guide covers a designer/specifier through a system-atic determination of those factors of the appropriate applica-tion environment that may affect the post-construction service life of a geosynthetic. Subsequently, test methods are recom-mended to facilitate an experimental evaluation of the durabil-ity of geosynthetics in a specified environment so that the durability can be considered in

1.1 These test methods cover the determination of the amount of carbon black in a masterbatch and cover emulsion SBR-carbon black mixtures, but may be applicable to other polymers. Three test methods are included: N OTE 1—The nomenclature used in these test methods is in accordance with Practice D1418. 1.2 The values stated in SI

1.1 This test method describes the measurement of the number of binding sites per unit length or width of machine-made, woven, knitted, and tufted pile yarn floor covering both before and after adhesive backing application. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical

1.1 This practice identifies design and construction consid-erations to be applied to monitoring wells for protection from natural and man caused damage or impacts. 1.2 The installation and development of a well is a costly and detailed activity with the goal of providing representative samples and data throughout the design life of the well.Damages to

1.1 This guide covers how hollow-stem auger-drilling sys-tems may be used for geoenvironmental exploration and installation of subsurface water-quality monitoring devices. 1.2 Hollow-stem auger drilling for geoenvironmental explo-ration and monitoring device installations often involves safety planning, administration, and documentation. This guide does not purport to specifically address exploration and site safety.

1.1 This test method determines the amount of bromine-reactive material in aromatic hydrocarbons and is thus a measure oftrace amounts ofunsaturates in these materials. It is applicable to materials having bromine indexes below 500.

1.1 These test methods for chemical analysis ofextractables from synthetic rubbers are intended for general use on solid uncompounded styrene-butadiene copolymers commonly re-ferred to as SBR. Analysis of other synthetic rubbers is also possible with some ofthese test methods. The test methods and the sections in which they are covered are as follows:

1.1 This specification covers performance levels for adhe-sives to be used in laminate joints in nonstructural lumber products. Such products include, but are not limited to, interior and exterior mouldings, window and door components or parts,and bonded lumber panels. This specification is to be used to evaluate adhesives as well as the adhesive bonds in

1.1 This test method determines the resistance of a stretch wrap film to the penetration of a probe at a standard low rate,a single test velocity. Performed at standard conditions, the test method imparts a biaxial stress that is representative ofthe type of stress encountered in many product end-use applications.The maximum force, force at break,