UL Standards

1.1 This standard covers portable flexible lighting products with a maximum input voltage rating of 120 volts to be used in accordance with the National Electrical Code, ANSI/NFPA 70. These products are provided with a power supply cord and are intended for outline and decorative lighting use. 1.2 These requirements cover lighting products incorporating non-replaceable […]

1.1 These requirements cover the test methods for measuring the fire performance of sheet plastics used in semi-conductor wet bench tool construction. 1.2 Plastic materials that are classified as Class 1 or Class 2 demonstrate limited fire propagation without the use of sprinklers.

1.1 These requirements cover manually, electrically and pneumatically powered lifts. They are intended for the lifting and transport of materials and not for the movement or support of people. They are rated 250 volts or less, to be employed in nonhazardous environmental locations in accordance with the National Electrical Code, NFPA 70. 1.2 This standard

1.1 This procedure utlines a framework for measuring and vlldating products (including intermediate products) that are resistant to bacterial growth. 12 Products that qualfty for “resistance to bacterial growth” claim must demonstrate that the ant bacterial activity obiained according to the test method of this procedure is 2.0 or greater.

1 .1 These requirements cover Type ITC instrumentation control cables consisting of two or more current-carrying copper or thermocouple alloy conductors with or without either or both: a) Grounding conductor(s), bare or insulated, and b) One or more optical-fiber members, all under an overall jacket. These electrical and composite electrical/optical-fiber cables are intended for use

1.1 These requirements cover hardware for the support of conduit, tubing, and cable, such as HANGERS,STAPLES, STRAPS, and similar devices for Installation in accordance with the National Elecrical Code, NFPA 70, and the Canadian Electrical Code (CEC), Part 1. 1.2 These requirements also cover STANDOFFS for nonmallic-sheathed cable, PROTECTOR PLATES, and PROTECTOR BUSHINGS.

1.1 These requirements cover devices intended for inter-connection of equipment, sensors, and actuators in remote-control, signaling, and power-limited circuits. Included are cable assemblies and fittings, feeder-tap cable systems, feed-through connectors, multi-outlet fittings, panel-mount fittings, and splitters. i These devices are rated not more than 60 A and not more than 600 V. 1.1.1 These devices

1.1 These requirements cover stationary engine generator assemblies that are intended for installation and use in ordinary locations in accordance with the following: a) The National Electrical Code, NFPA 70; b) The Canadian Electrical Code, Part I, CSA C22.1; c) The Standard for the Installation and Use of Stationary Combustion Engines and Gas Turbines,NFPA 37;

1 .1 This standard contains test procedures and methods to evaluate refrigerants and mark their containers according to the extent of the refrigerant’s flammability with regard to their intended use as components of air-conditioning and refrigeration equipment. 1.2 Deleted