This document covers minimum criteria to aid in organizing and conducting electrical inspections, which includes administration, plans review, and feld inspection, for new electrical installations and modifcations to existing electri‐cal installations in conformance with AHJ requirements.

This standard provides requirements for are protection of telecommunications facilities, including landline,cable, wireless, and satellite telecommunication services such as telephone/voice, voice over internet protocol (VoIP), internet,data, and video transmission that are rendered to the public.

This standard covers the requirements for the protection of information technology equipment (ITE) and ITE areas.

This standard provides criteria for identifcation of hazardous conditions of electrical systems in existing one-family, two-family, and multifamily dwellings, including mobile homes and manufactured homes.

1.1.1 This guide applies to the design, installation, and opera‐tion of piping systems containing fammable gases where there is a potential for ignition. 1.1.2 This guide addresses protection methods for use where the pipe explosion risk is due to either a defagration or a deto‐nation.

This standard provides requirements applicable to agricultural and/or food processing facilities for managing or mitigating are and explosion hazards of combustible agricul‐tural or food processing dusts or related particulate solids.

This code shall apply to the storage, handling,transpoctation, and use of liquefied petroleum gas (LP-Gas).

Applicability. This code shall apply to the installation,storage, use, and handling of compressed gases and cryogenic fuids in portable and stationary cylinders, containers, equip‐ment, and tanks in all occupancies.

1.1.1 This code shall apply to the design, installation, opera‐tion, and maintenance of compressed natural gas (CNG) and liquefed natural gas (LNG) engine fuel systems on vehicles of all types and for fueling vehicle (dispensing) systems and facili‐ties, and associated storage, including the following: (1) Original equipment manufacturers (OEMs) (2) Final-stage vehicle integrator/manufacturer (FSVIM) (3)