1.1.1.1 Test Method I shall apply to materials with an areal density less than or equal to 700 g/m² (21 oz/yd”), including the following: (1) Fabrics or other materials used in curtains, draperies, or other window treatments (2)Single-layer fabrics (3)Multilayer curtain and drapery assemblies in which the layers are fastened together by sewing or other […]

This guide addresses planning, training, person-nel, equipment, and facilities as they relate to emergency and safety operations at motorsports venues.

This standard shall apply to the selection, requirements,duties, and training of security personnel who will perform fre loss prevention duties.

This standard contains minimum requirements for organizing, operating, training, and equipping facility are brigades for response to ares in industrial, commercial, institu‐tional, and similar properties.

The scope of this standard is the determination of the fre load and fre load density to be used as the basis for the evaluation and design of the structural fre performance of a building.

This guide is intended to provide assistance,primarily to authorities having jurisdiction (AHJs), in evaluat‐ing the appropriateness and execution of a fire risk assessment (FRA) for a given fire safety problem. While this guide primar‐ily addresses regulatory officials, it also is intended for others who review FRAs, such as insurance company representatives and building owners.

This guide provides direction for planning,preparing, implementing, and evaluating community health care programs to agencies supporting the emergency medical services (EMS) mission.

This standard establishes test procedures for evalu‐ating the foam fre-fghting equipment installed on aircraft rescue and fre-fghting vehicles designed in accordance with NFPA 414.

This standard shall apply to the safeguarding of tanks or containers operating at nominal atmospheric pressure that contain or have contained fammable or combustible liquids or other hazardous substances and related vapors or residues.

This standard applies to vessels that carry or burn as fuel, flammable or combustible liquids, flammable compressed gases, flammable cryogenic liquids, chemicals in bulk, or other products capable of creating a hazardous condition.