This European Standard specifies the minimum requirements for the safe and independent access and use of lifts by a wide range of persons, including persons with disabilities. It is applicable to new passenger and goods passenger lifts according to EN 81-20. For other types of lifts, e.g. inclined lifts according to EN 81-22, this standard […]

This standard specifies the safety rules for the construction and installation of permanently installed new electric service lifts with traction or positive drive, or hydraulic service lifts defined as lifting equipment, serving defined landing levels, having a car, the interior of which is regarded as inaccessible to persons on account of its dimensions and means

This Standard specifies requirements for the construction of commercial applications for tennis court fencing for a range of alternative types and design options. It also includes requirements for wire coatings, pipe grades and tables. NOTES: 1 AS 1725 Parts 1 to 5 fencing solutions are not deemed to be structures as defined in AS 4100,therefore,

This Standard sets out design considerations and methods for nailplated timber roof trusses for residential and other buildings within the following limitations: (a) Residential structures, light commercial structures, and non-habitable structures. (b) Maximum roof piteh of 459. (6) Maximum truss span of 16 m. (d) Maximum truss spacing of 1200 mm.

This Standard specifies requirements for building practice and for the selection, placement and fixing of the various structural elements used in the construction of timber-framed Class 1 and Class 10 Buildings as defined by the Building Code of Australia and within the limitations given in Clause 1.4. The provisions of the Standard also apply to

This Standard specifies requirements for building practice and the selection, placement and fixing of the various structural elements used in the construction of timber-framed Class 1 and Class 10 buildings as defined by the Building Code of Australia and within the limitations given in Clause 1.4. The provisions of this Standard also apply to alterations

This Standard specifies requirements for the design, installation and commissioning of emergency warning systems and emergency intercom systems comprised of components complying with the requirements of the applicable normative reference equipment Standards. NOTES: 1 The general procedures for the use of the emergency warning and intercom systems and the response of personnel are given in

This Standard specifies abrasive blast cleaning methods for the preparation of steel surfaces before coating with paints and related products. It also contains information on the effectiveness of the individual methods and their fields of application. NOTES: 1 Information on purchasing guidelines may be found in Appendix A. 2 Information on abrasive blasting of surfaces