1.1 These requirements cover automatic sprinklers including conventional, spray, sidewall, extended coverage, residential, certain specific application sprinklers and storage sprinklers including early suppression fast response (ESFR) intended for installation on sprinkler systems for fire-protection service.Requirements for the installation and use of sprinklers are included in the Standards for the Installation of Sprinkler Systems, NFPA 13; […]

These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations and portable smoke alarms used as “travel” alarms in accordance with: a) National Fire Alarm and Signaling Code, NFPA 72; b) Standard for Recreational Vehicles, NFPA 501C, for smoke alarms intended for use in recreational vehicles;

1.1 This standard covers rubber gasketed ftings intended for assembling sections of pipe in fire protection systems, for example, couplings to attach pipe sections end to end, and side outlets to attach pipe sections at right angles. 1.2 The products covered by this standard are intended for use in fire protection service as outined by

1.1 These requirements cover the performance of pipe hanger equipment for use in supporting piping employed in sprinkler systems, water-spray systems, and other piping systems used for fire-protection service. 1.2 Requirements for the installation of pipe hangers and auxiliary equipment and limitations for use of specific sizes of hangers and pipe are included in the

1 .1 These requirements cover wiring systems for use in outdoor locations, field-installed wiring assemblies using off-site manufactured subassemblies for branch circuits, remote-control circuits, signaling circuits, and communication circuits in accessible areas. The products covered under this standard are to be installed in accordance with Article 604 of the National Electrical Code, ANSI/NFPA 70.