1.1 These requirements apply to household, commercial, and institutional-use carts, stands and entertainment centers intended to provide a surface for the support or attachment of audio and/or video equipment. 1.2 These requirements also apply to tall institutional-use carts and stands intended to provide a surface for the support of audio and/or video equipment that have […]

1.1 These requirements cover discharge-path resistors that are intended to be connected between the antenna and the supply circuit of a radio-, video-, or television-type appliance. The resistors are intended to reduce the risk of fire or electric shock due to the buildup of a static electrical charge on the antenna connected to the appliance.

1 .1 These requirements cover single and multiple optical-fiber cables for control, signaling, and communications as described in Article 770 and other applicable parts of the National Electrical Code (NEC). Cables complying with these requirements are: Type OFNP – Plenum – A nonconductive cable for use in ducts, plenums, and other spaces used for environmental

1 .1 These requirements cover motor-operated massage and exercise machines, such as vibrators,exercise bicycles, vibrating and massaging chairs, and the like, are to be employed in accordance with the National Electrical Code, NFPA 70. 1.2 These requirements also cover massage and exercise machines such as vibrators in which motion of an operating part is produced

1.1 This standard contains specific details of the conductors, of the insulation, of the jackets and other coverings, and of the methods of sample preparation, of specimen selection and conditioning, and of measurement and calculation that are required in wire and cable standards. 1.2 The requirements for the particular materials, construction, performance, and marking of

1 .1 These requirements apply to self-contained spas. They also apply to field-installed equipment assemblies, blowers, and controls for use with field-installed hot tubs, swimming pools, and non-self-contained spas. These products are for household or commercial use, indoors, outdoors, or both.All equipment is intended for installation and use in accordance with Article 680 of the

1.1 These requirements cover wearable buoyant devices having: a) At least one compartment that relies upon inflation by gas or other medium to provide buoyancy, and b) A quantity of inherently buoyant material.

1.1 These requirements cover cord-connected electrically operated lawn mowers rated 250 volts or less to be employed in accordance with ANSI/NFPA 70. 1.2 These requirements also cover battery-powered lawn mowers as specified in Battery-Powered Lawn Mowers, Supplement SA in this Standard.

1.1 These requirements cover test procedures to be used in the evaluation of Class 120(E) or higher electrical insulation systems (EIS) for use in the United States, and Class 130(B) or higher EIS for use in Canada, where the thermal factor is the dominating aging factor. These requirements also cover the investigation of the substitution

1 .1 The requirements of this Standard apply to Grades A and B acrylic-polymer-coated,silicone-polymer-coated, or vinyl-polymer-coated electrical sleeving that consists of closely woven fabric made from glass (see Table 1 for materials and ratings) and intended for use in equipment designed to be installed and used in accordance with the rules of the Canadian Electrical