This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or subcontractors,of paris made of wrought or additively manufactured nickel or cobalt alloys, of raw materials during fabrication, and of fabricated assemblies in which wrought nickel or cobalt alloys are the primary structural components.
SAE AMS 2774G:2020 pdf download Read More »
This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors, of parts (see 8.6.1). It also covers heat treatment by warehouses or distributors converting raw material from one temper to another temper (see 1.3 and 8.5). It covers the fllowving aluminum alloys: 1100, 2004, 2014, 2017, 2024,
SAE AMS 2770R:2020 pdf download Read More »
This specification establishes the requirements and procedures for heat treating parts in vacuum/partial pressure and shall be used as a supplementary document to primary heat treating specifications as applicable.
SAE AMS 2769D:2020 pdf download Read More »
1.1 This specification establishes general requirements for the heat treatment of steel raw material (see 8.2.1) by producers or for producers. 1.1.1 This specification covers the requirements for fumace equipment, test procedures and information for heat-treating procedures, heat-treating temperatures, and material test procedures. 1.1.2 This specification describes procedures that will produce the desired properties and
SAE AMS 2761:2020 pdf download Read More »
1.1 This specification covers pyrometric requirements for equipment used for the thermal processing of mealic materials.Specically, it covers temperature sensors, instrumentation, thermal processing equipment, correction factors and instrument offsets, system accuracy tests, and temperature uniformity surveys. These are necessary to ensure that parts or raw materials are heat treated in accordance with the applicable specification(s).
SAE AMS 2750F:2020 pdf download Read More »
This specification establishes the classification, technical requirements, tests, and test procedures for the qualification,approval, and quality verification of all materials used in the liquid penetrant methods of inspection with the exception of those excluded in the application section.
SAE AMS 2644H:2020 pdf download Read More »
This specifcation covers two types of refined hydrocarbon compounds in the form of liquids. This specification only cowers newly manufactured materials.
SAE AMS 2641D:2020 pdf download Read More »
1. Purchase order shall specify not less than the fllowin AMS2417K ●Plating thickness, itf other than specified in 3.4.2.3 ●Type and Grade designation (see 1.3) ●Basis metal to be plated ●Tensile strength or hardness of the basis metal ●If pre-plate stress relief (time and temperature) is to be performed by plating processor and if diferent
SAE AMS 2417K:2020 pdf download Read More »
While resitance welding machines vary considerably in size and complexity, there are basic principles applicable to the installation, operation, maintenance, and troubleshooting. This document is intended to provide basic information to the users of the resistance welding equipment to supplement the instructions and recommendations of the equipment manufacturer. Where there is confict, the equipment manufacturers”
AWS J1.2M:2016 pdf download Read More »
This guide provides information on welding processes and procedures that are recommended for use in tita-nium fabrication. The document presents detailed and up-to-date technical information on the best practices to allow first time fabricators of titanium as well as established fabricators to join titanium parts into high quality components.
AWS G2.4:2014 pdf download Read More »