1.1 This specification covers five grades of zinc-5 % aluminum-mischmetal (Zn-5 Al-MM) alloy-coated, steel wire strand, composed of a number of round, steel wires, with four weights of Zn-5 Al-MM alloy coatings, suitable for use as guys, messengers, span wires, and for similar purposes. The product is intended for applications requiring corrosion resis-tance and formability.

1.1 This speification covers post: ppied coutings, pavings,and linings for corruygaled steel pipe and corrugated steel stnuctural plate pipe. pipe arches, and arches coated, paved. or lined with specified materials over eitber metallic couings or meallic coatings with polymer contings. This specification includes asphalt, polymerized asphal, polymer, mastic, and emulsion coatings and asphalt and concrete

1.1 This specification covers parts produced from iron-phosphorus powder metallurgy materials. These parts are used in magnetic applications requiring higher permeability and electrical resistivity and lower coercive field strength than attainable routinely from parts produced from iron powder.

1.1 This specification covers standard nominal sizes and size tolerances of screened ferroalloy and alloy additive products. This specification provides a range of sizes as referenced in all ASTM specifications for ferroalloys and alloy additives.

1.1 This specification covers gray iron castings that are statically cast in permanent molds. 1.2 No precise quantitative relationship can be stated be-tween the properties ofthe iron in various locations ofthe same casting or between the properties ofa casting and those ofa test specimen cast from the same iron (see Appendix X1).

1.1 This specification covers uncoated, high-strength, hard-drawn steel wire for use in the construction of prestressedconcrete tanks and similar structures. In application, the wire iscontinwously wrapped on the structure maintaining tension by adevice using a wire drawing die, or mechanical tensioningsystem without re-drawing. 1.2 This specification is applicable only to the condition of thewire as

1.1 This specification cowers parts produced from iron powder metallurgy materials. 1.2 This specification deals with powder meallungy parts in the sintered or annealed condition. Should the sintered parts be subjected to any secondary operation that causes mechanical strain, such 2as machining of sizing. they should be resintered or annealed.

1.1 This practice primarily covers procedures, soils, and soil placement for the proper installation of corrugated steel struc-tural plate pipe, pipe-arches, arches, and underpasses produced to Specification A761/A761M, in either trench or embankment installations. This practice also covers installation of structural plate for alternative uses that do not involve backfilling or soil-structure interaction.

1.1 This specification covers black and hot-dipped galva-nized welded and seamless steel pipe in NPS 1/2 to NPS 10,inclusive [DN 15 to DN 250, inclusive] (Note 1), with wall thicknesses as given in Table 1 and Table 2. Pipe having other wall thicknesses may be furnished provided such pipe complies with all other requirements of