1.1 This test method covers an extreme pressure (EP) lubricating oil’s coefficient of friction and its ability to protect against wear when subjected to high-frequency, linear oscilla-tion motion. The procedure is identical to that described in DIN 51834. 1.2 This test method can also be used to determine the ability of a non-EP lubricating oil […]

1.1 This test method covers a bench test procedure to evaluate the tendency of automotive spark-ignition engine fuel to foul electronic port fuel injectors (PFI). The test method utilizes a bench apparatus equipped with Bosch injectors specified for use in a 1985-1987 Chrysler 2.2 L turbocharged engine. This test method is based on a test

1.1 This practice is intended for application to soils that may contain volatile waste constituents. 1.2 This practice provides a procedure for using the dispos-able En Core 2 sampler to collect and store a soil sample for volatile organic analysis.

1.1 This test method determines the curved beam strength of a continuous fiber-reinforced composite material using a 90° curved beam specimen (Fig. 1). The curved beam consists of two straight legs connected by a 90° bend with a 6.4-mm inner radius. An out-of-plane (through-the-thickness) tensile stress is produced in the curved region of the specimen

1.1 These test methods cover procedures to determine the total mercury content in a sample of coal or coal combustion residue. 1.2 The values stated in SI units are regarded as the standard.

1.1 The specifheation covers a two part flowable space grade room temperature vulcanizing (RTV) silicone rubber adhesive or compound. The material is speifially designed for appli-cations requiring extreme low temperature, low oulgassing and minimal volatile condensibles under extreme operating condi-tions. The RTV silicone rubber should be suitable for with-standing environmental exposure to temperatures from -115

1.1 The specification covers a two-part flowable space grade room temperature vulcanizing (RTV) silicone rubber adhesive or compound. The material is specifically designed for appli-cations requiring extreme low temperature, low outgassing and minimal volatile condensibles under extreme operating condi-tions. The RTV silicone rubber should be suitable for with-standing environmental exposure to temperatures from –115 to

1.1 This test method covers the analysis of tannery liquors made up from vegetable tanning materials. 1.2 The values stated in SI units are to be regarded as the standard.

1.1 This test method covers determining the sugars present in vegetable tanning materials. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.

1.1 This practice covers extracting the tannin from raw and spent materials. The water extract obtained by this method is used to determine the tannin content of the original material.Analysis for total solids, soluble solids, and soluble non-tannins of the water extract from a material provides the information necessary to calculate the extractable tannin con-tent