This Standard covers physical and performance requirements and test methods pertaining to dual flush devices that are installed within water closet tanks which use 3.5 gpf (13.2 Lpf) or greater volume, to reduce total volumetric water consumption.

This Standard establishes design requirements for floor, area, adjustable floor, and trench drains that are used inside of, or outside and immediately adjacent to, building structures that are typically nonresidential. It includes definitions, nomenclature, outlet types and connections, grate-free area, top loading classifications, materials and finishes, and variations in product design.

This Standard eslablishes physical, material, testing,and marking requirements for six-iter water closets that incorporate a water-conserving duai fiushing feature into the design of the fxure. The tests specified in this Standard are for removal of liquid wastes and toilet tissue or other comparable waste loads that are expected when actuating the reduced fush feature of

This Standard shall show material and performance specifications and use of protectors/insulators for exposed waste and supplies for public/commercial and private/residential buildings using product covered under this Standard.

This Standard covers plumbing supply fittings and accessories located between the supply stop and the terminal fitting, inclusive, as follows: (a) automatic compensating valves for individual wall-mounted showering systems; (b) bath and shower supply fittings; (c) bidet supply fittings; (d) clothes washer supply fittings; (e) drinking fountain supply fittings; (f) humidifier supply stops; (g) kitchen,

This Standard applies to sanitary floor sinks and includes requirements formaterial, construction, inspec-tion, testing, and marking. The provisions of this Standard are not intended to prevent the use of any alternate materials or methods ofconstruction, provided any such alternate meets the intent of this Standard.

This Standard applies to enameled and epoxy coated cast iron and PVC plastic sanitary floor sinks and includes requirements for material, construction, inspec-tion, testing, and marking. The provisions of this Standard are not intended to prevent the use of any alternate materials or methods of construction, provided any such alternate meets the intent of this

This Standard covers floor, area, adjustable floor, and trench drains that are used inside of, or outside and immediately adjacent to, building structures. This Standard specifies design requirements, definitions,nomenclature, outlet types and connections, grate-free areas, top-loading classifications, materials, and fin-ishes. Seam-welded, socket-type, stainless steel fabri-cated drains are covered in ASME A112.3.1.