ISO Standards

ISO 1524:2013 specifies a method for determining the fineness of grind of paints, inks and related products by use of a suitable gauge, graduated in micrometres. It is applicable to all types of liquid paints and related products, except products containing pigments in flake form (e.g. glass flakes, micaceous iron oxides, zinc flakes).

ISO 1503:2008 sets out design principles, procedures, requirements and recommendations for the spatial orientation and direction of movement of controls and displays used in tool machines, industrial robots,office machines, earth-moving machinery, transportation (automobiles, railway electric cars/rolling stock, aircraft, ships, etc.), information, daily commodities, public utilities and the operational components of building facilities.

This International Standard specifies the conditions for performing torsional, constant-amplitude, nominally elastic stress fatigue tests on metallic specimens without deliberately introducing stress concentrations. The tests are typically carried out at ambient temperature in air (ideally at between 10 °C and 35 °C) by applying a pure couple to the specimen about its longitudinal axis. While

ISO 1346:2012 specifes requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes,8-strand braided ropes and 12-strand braided ropes for general service made of polypropylene, and gives rules for their designation.

ISO 1207:2011 specifies the characteristics of slotted cheese head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 261, ISO 888, ISO 898-1, ISO 965-2,ISO

ISO 1182:2010 specifies a method of test for determining the non-combustibility performance,under specified conditions, of homogeneous products and substantial components of non-homogeneous products. Information on the precision of the test method is given in Annex A.

This International Standard specifes requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes,8-strand braided ropes and 12-strand braided ropes for general service made of polyamide, and gives rules for their designation.

ISO 1101:2012 contains basic information and gives requirements for the geometrical tolerancing of workpieces. It represents the initial basis and defines the fundamentals for geometrical tolerancing. NOTE Other International Standards referenced in Clause 2 and in Table 2 provide more detailed information on geometrical tolerancing.