ISO Standards

ISO 12873:2010 specifies the determination of the wax content, as a mass fraction expressed in milligrams per kilogram, of olive oils and olive-pomace oils. The individual waxes are separated according to the number of carbon atoms. The method is recommended for distinguishing between olive oil obtained by pressing or centrifuging and that obtained from olive […]

ISO 12836:2012 specifes test methods for the assessment of the accuracy of digitizing devices for computer-aided design/computer-aided manufacturing (CAD/CAM) systems for indirect dental restorations. These test methods are not applicable to digitization by radiographic methods (X-ray) and by magnetic resonance imaging methods (MRI).

ISO 12818:2013 specifies the tolerances for the bottles intended to be used for pharmaceutical products, cosmetic and perfumery products and chemical products. The following tolerances are concerned: — brimful capacity; — height; — diameter and width; — verticality. The following types of bottles are excluded from this International Standard: — “miniatures”; — small bottles for

ISO 12813:2015 defines requirements for short-range communication for the purposes of compliance checking in autonomous electronic fee-collecting systems. Compliance checking communication (CCC) takes place between a road vehicle’s on-board equipment (OBE) and an outside interrogator (road-side mounted equipment, mobile device or hand-held unit), and serves to establish whether the data that are delivered by the

ISO 12655:2013 sets out a consistent methodology to present energy use in buildings, which is specified clearly with the energy usage, corresponding boundary and the energy data (presented with original energy carriers or equivalent energy). This International Standard is applicable to the presentation of energy use of civil buildings for data collection, metering, statistics, audit

ISO 12571:2013 specifies two alternative methods for determining hygroscopic sorption properties of porous building materials and products: a) using desiccators and weighing cups (desiccator method); b) using a climatic chamber (climatic chamber method). The desiccator method is the reference method.

ISO 12482:2014 specifies a method for monitoring, during long-term operation, the actual duty of the crane, and a means of comparing this to the original design duty which was specified through classification. The related design standard is ISO 4301-1. Approaching the design life limit means an increased probability of hazards. Monitoring of crane use一as described