ASTM Standards

1.1 This specification covers general requirements that shall apply to stainless wire and wire rods. Wire rods are a semifinished product intended primarily for the manufacture of wire. Wire is intended primarily for cold forming, including coiling, stranding, weaving, heading and machining as covered under the latest revision of each of the following ASTM specifications: […]

1.1 This specification covers castings made of ductile iron,also known as spheroidal or nodular iron, which is described as cast iron with the graphite substantially spheroidal in shape and essentially free of other forms of graphite, as defined in Terminology A644.

1.1 This is an acceptance specification for the ultrasonic inspection of forged steel crankshafts having main bearing journals or crankpins 4 in. [100 mm] or larger in diameter. 1.2 This specification covers the testing equipment required and the test procedure to be followed, and it defines the critical and noncritical areas and limits of acceptance.

1.1 This specification covers carbon steel bars and shapes produced from standard rail steel. These burs are furmished in the as-wrought condition intended for structural use, or bar and shape uses, where high tensile properties are applicable. These materials are available in four strength levels as Grade 50,Grade 60, Grade 70, and Grade 80. 1.2

1.1 This specification covers carbon steel bars and shapes produced from standard rail steel. These bars are furnished in the as-wrought condition intended for structural use, or bar and shape uses, where high tensile properties are applicable. These materials are available in four strength levels as Grade 50,Grade 60, Grade 70, and Grade 80.

1.1 This specification covers general requirements that shall apply to wrought stainless steel bars, shapes, forgings,and billets or other semi-finished material (except wire) for forging, under the latest revision of each of the following ASTM speci fications:A276/A276M , A314 , A458 , A477 , A479/A479M, A564/A564M, A565/A565M, A582/A582M, A638/A638M, A705/A705M, and A831/A831M.

1.1 This specification 2 covers a group of general require-ments that, unless otherwise specified in the purchase order or in an individual specification, shall apply to rolled steel plate, sheet, and strip, under each of the following specifications issued by ASTM: Specifications A240/A240M, A263, A264,A265, A666, A693, A793, and A895.

1.1 This specification 2 covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction. 2 N OTE 1—There are standards covering high nickel, chromium, auste-nitic corrosion, and heat-resisting alloy materials. These standards are

1.1 This specification covers five grades of zinc-coated,steel wire strand, composed of a number of round, steel wires,with four weights of zinc coatings, suitable for use as guys,messengers, span wires, and for similar purposes. 1.2 The five grades covered are as follows: 1.2.1 Utilities, 1.2.2 Common, 1.2.3 Siemens-Martin, 1.2.4 High-Strength, and 1.2.5 Extra High-Strength.